4K 4:4:4/60 HDMI Scaler with Audio RSL3-4K

Precision scalar is an essential tool when mixing 4K & 2K screens on the same distribution system, enables in-line scaling of HDMI content resolutions and frame rates. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.

Audio and Video

• Inputs:
  • 1x HDMI (2.0) In: 19-pin Type A

• Outputs:
  • 1x HDMI (2.0) Out: 19-pin Type A
  • 1x S/PDIF Out: TOSLINK (Digital Optical)
  • HDMI Pass-through: 2ch PCM
  • 1x HDMI (female) embedded at HDMI Input and Output

• Supported Audio Formats:
  • HDMI Pass-through: 2ch PCM

Video Resolution (HDMI)

• 1920×1080p @60Hz, chroma sampling (12-bit) – 15m/49ft

• 3840×2160p @24Hz, 4:2:0 HDR (10-bit) – 7m/23ft

• 3840×2160p @30Hz, 4:4:4 (8-bit) – 7m/23ft

• 3840×2160p @60Hz, 4:2:0 HDR (10-bit) – 5m/16ft

• 3840×2160p @60Hz, 4:2:2 HDR (12-bit) – 3m/10ft

• 4096×2160p @60Hz, 4:2:0 (8-bit) – 7m/23ft

• 4096×2160p @60Hz, 4:4:4 (8-bit) – 3m/10ft

• Supported Standards: DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | BT.2020 | BT.2100

• Maximum Pixel Clock: 600 MHz

Communication and Control

• HDMI: HDMI 2.0 | HDCP 2.3 | Built-in EDID Management

• Input Support: DVI-D and DisplayPort Dual-Mode (DP++) v1.3 (via adapter, not included)

• Controls:
  • 1x RS-232 (3-pin Terminal Block, 3.5mm)
  • 1x USB-A (Firmware updates only)
  • 1x RJ45 Ethernet
  • Front Panel Control
  • IR

Power

• Power Supply: 12V DC, 2A

• Max Power Consumption: 8.38W

• Maximum Heat Dissipation: 29 BTU/hr

Environmental

• Operating Temperature: 32°F ~ 122°F (0°C ~ 50°C), 10%–90% RH, non-condensing

• Storage Temperature: -4°F ~ 158°F (-20°C ~ +70°C), 10%–90% RH, non-condensing

Dimensions and Weight

• Rack Units | Wall Box: <1U

• Height: 25mm / 0.99in (with or without feet)

• Width: 110mm / 4.34in (with or without brackets)

• Depth: 150.1mm / 5.91in (with or without handles)

• Weight: 0.476kg / 1.05lbs

Regulatory

• Certifications: CE | FCC | UL | RoHS | RCM

• Scales any incoming HDMI content down to 640×480 or up to 4096×2160
• Compatible with 18 Gbps HDMI signals up to 2160p/60 4:4:4 chroma sampling
• Converts HDR content and strips metadata for universal display compatibility
• Converts HDCP encryption to match connected displays/projectors and includes scenario test patterns for alignment
• Provides audio output with de-embedded 2-channel PCM
• Seamless transition effects (cut, fade, dissolve, wipe) with no black screens or flicker during source switching
• Setup and configuration via PC tool
• Powered by 12 V DC supply (PSU with US, UK, EU, AU pins included)
• Mounting brackets included
• Requires USB–3-pin Phoenix cable for setup (p/n CAB-USB-PX1, not included)

Supported Scaling Resolutions

Auto set (based on EDID from display) or manual selection:
4096×2160/60, 4096×2160/30, 4096×2160/25, 4096×2160/24
3840×2160/60, 3840×2160/50, 3840×2160/30, 3840×2160/25, 3840×2160/24
1920×1200/60, 1920×1080/60, 1920×1080/50
1680×1050/60, 1600×1200/60, 1600×900/60, 1440×900/60
1366×768/60, 1360×768/60, 1280×1024/60, 1280×960/60
1280×800/60, 1280×768/60, 1280×720/60, 1280×720/50
1024×768/60, 800×600/60, 640×480/60

Audio Support

• LPCM up to 7.1 channels, 24-bit / 192 kHz
• Dolby Atmos, Dolby TrueHD, Dolby legacy formats
• All DTS legacy formats, including DTS-X, DTS-HD Master Audio, DTS 96/24